Hi, I used the kitchen scales and the open ended shower hose. Opened the cold tap and pushed the hose onto the scales until the water was almost stopped.
The scales read over 10 pounds, water was still spraying out of the sides. The area of the hose was approximately 0.12 square inches, so PSI was around 83 PSI, this works out to around 5 bar.
I do get water hammer sounds regularly. So can I safely assume my cold mains pressure is over 5 Bar?
Thanks
The scales read over 10 pounds, water was still spraying out of the sides. The area of the hose was approximately 0.12 square inches, so PSI was around 83 PSI, this works out to around 5 bar.
I do get water hammer sounds regularly. So can I safely assume my cold mains pressure is over 5 Bar?
Thanks