Is there a maximum time with leaving sludge remover
- Thread starter timber
- Start date
Timber, administer the chemical X400 into your heating system approx 4 weeks before you intend to carry out the work, this will ensure you get the full benfits of the chemical. Any residue of the chemical X400 left in the system after work will not be detrimental and also not be of any long term benefit.
agreed, but the X400 bottle is the only one with sludge remover written on it in bold blue text.
I assumed the OP was refering to X400, and I apologise if in-correct
I assumed the OP was refering to X400, and I apologise if in-correct
- Joined
- 2 Nov 2005
- Messages
- 3,401
- Reaction score
- 246
- Country
Hmmmm ...i wonder if it could be the one that says "sludge remover" on it
ps...i took me ages to do that lot so just accept it and move on.
Where did you get the photos from?
- Joined
- 2 Nov 2005
- Messages
- 3,401
- Reaction score
- 246
- Country
I ran out to the van with my camera
Joking....from here.
http://www.sentinel-solutions.net/en/heating/X400
If you right click on photos or images or owt really and then click on properties you get a box that gives the URL.
You can then copy and paste it into this forum using the image button.
Thanks guys for the replies, I'll give it a try soon but first I'm trying to get the boiler fixed as it broke down yesterday
(pilot light keeps going out when I take my finger off the gas valve button)
Any ideas?
Ive had the same problem on my boiler before, had new thermocouple, made no difference. Ended up with a new gas valve (not very cheap).
Similar threads
