Is there any/much advantage to using 10mm2 cable for an EV charger instead of 6mm2?

There is a bit of merit in that and it is something I did actually wonder when organising this.

Clearly there are some extra losses using 6mm2 compared to 10mm2 but I think their figures are a little misleading.

CHART.png


They're allowing for 1125 hours use per year which at 7.4kw is 8325kWh per year. If you allow 3 mi/kWh average then that's 25k miles a year which is higher than the average but possible with 2 cars in a house. A lot of households only do 10k a year including us.

Secondly if someone is doing lots of miles in an EV then they'll be on an EV tariff in which case the kWh cost on something like IOG is £0.075.

In our case I think the difference would work out to be less than £1 a year.
 
Last edited:

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top