Hi all,
Firstly I am a bit of a boiler newbie so please forgive any stupidity on my behalf. I have recently moved into my first property. Which has the sime boiler installed it has recently developed an error with the hot water and central heating. When a hot water tap is opened the boiler turns on but that is all. Before, when it worked, after a couple of seconds it would make a second noise and the bi colour led 2 would turn Orange,and I would have hot water. Now if I leave the hot water tap on after a few mins the led 1 flash green. Having downloaded the manuals it tells me that this is a fan error. But not sure what this means in terms of cost of repair/replacement or what it really means. I have also noted that the pressure is low, between .25 and .50 the system has a flexible filling loop installed but I am not sure what pressure the system should be operating at. Any advice, guidance or help would really be appreciated. Thanks in advance
Firstly I am a bit of a boiler newbie so please forgive any stupidity on my behalf. I have recently moved into my first property. Which has the sime boiler installed it has recently developed an error with the hot water and central heating. When a hot water tap is opened the boiler turns on but that is all. Before, when it worked, after a couple of seconds it would make a second noise and the bi colour led 2 would turn Orange,and I would have hot water. Now if I leave the hot water tap on after a few mins the led 1 flash green. Having downloaded the manuals it tells me that this is a fan error. But not sure what this means in terms of cost of repair/replacement or what it really means. I have also noted that the pressure is low, between .25 and .50 the system has a flexible filling loop installed but I am not sure what pressure the system should be operating at. Any advice, guidance or help would really be appreciated. Thanks in advance