Kitchen base unit

[johnnyglas]

Hi first time here , I am putting in some kitchen units in a very small flat I own , My problem is the copper pipe work coming out from under the combo boiler is sticking out a good few inches from the back wall just where the top of where one of my base units would be . Would cutting a bit of the top spar away to be covered by the worktop be ok ? Or is there another solution ? Thanks

 

[thomp1983]

Aslong as it's not more than half of it then it should be fine

 

[foxhole]

Yes you can remove, if they are self assembled then you could move the rear forward to avoid removing.