After realising I spent a small fortune on end panels that were almost completely concealed on my previous kitchen, this time I'm working through the plan and removing all unnecessary items before I okay the design.
One thing I'm not sure about, the design has specced an end panel either side of the built under double oven. I initially thought I'd just remove these. Would it cause any issues to attach the oven runners directly to the sides of the carcasses? What is usually done here? The panels are not required to support the worktop.
Cheers,
Dan
One thing I'm not sure about, the design has specced an end panel either side of the built under double oven. I initially thought I'd just remove these. Would it cause any issues to attach the oven runners directly to the sides of the carcasses? What is usually done here? The panels are not required to support the worktop.
Cheers,
Dan