KITCHEN MAKEOVER

[AnonymousImport]

HAS ANYONE JUST REPLACED THE DOOR /DRAWER FRONTS ONKITCHEN UNITS ARE THERE ANY OBVIOUS PITFALLS WHAT TO BE WARY OF OR IS IT LESS HASSLE TO JUST GETCOMPLETE NEW UNITS

 

[AnonymousImport]

no pitfalls just make sure you get the same size,swopping is straight forward just check the hinges but they are usually in the same place,it will save you alot of time and expense not to mention the mess of ripping out the old units if there ok...

 

[AnonymousImport]

thanx for that matey i shall be doing it shortly but just one more question how do they get those posh joins in the worktpops at the corners?

 

[AnonymousImport]

thanx for that matey i shall be doing it shortly but just one more question how do they get those posh joins in the worktpops at the corners?

 

[DAZB]

Those posh joints are called Masons Mitres and you will have to hire a Worktop Jig and a Router to cut them.If you aren't that good with a Router then I strongly advise paying for it doing by a Joiner because it is easy to ruin a full length of worktop if you make a few mistakes.In Leeds ,UK where I live you will probably pay about £30-£40 per joint inc. the Hire costs.