Large Basin wrench

[600rob]

can anyone one recommend where i might be able to get an adjustable basin wrench that has a capacity bigger that 32mm?

The back nut on my basin taps must be about 40mm across flats but i cant seem to find any wrenches that will fit anything bigger than 32mm

Cheers

 

[JimCrow]

http://www.my-tool-shed.co.uk/p8877...877&gpla=pla&gclid=CKSfiPqPg8kCFYrpwgod1j4IXQ

 

[Madrab]

http://www.diynot.com/diy/threads/got-one-yet.445865/

 

[600rob]

Ive got some similar to that but they dont fit up and under the sink to access the tap back nut as the clearane is very limitied
( The jaws are too small aswell, i need 40mm minimum)

I should have mentioned that i only need them for one job so only need something cheap that will work.

i found these in the end.
http://www.builderdepot.co.uk/drape...442-18l.html?gclid=CL_Hv9G4g8kCFWsTwwodD9EJaA

 

[Madrab]

lol...have fun with them

First thing I did after using them was throw them in the bin

There's always these - http://www.amazon.co.uk/dp/B004I388...SIN=B004I388AE&ascsubtag=-8969313363665443931