Hi all. I've taken this tap apart to see what's occurring. When installed it leaks just a smidgen at the swivel point when you knock the top section. I was thinking perished washer, but it seems not so.
The pohotos show 1-where the leak happens and 2 the top washer which seals the tap chamber from the outside world.
The top washer is what is leaking. Should I tape around it to make it fatter? Prise it off and try to fit another with the same inner but wider outer diameter? Any ideas? The tap still needs to swivel, so I can't just silicone the joint!
Grateful as ever
The pohotos show 1-where the leak happens and 2 the top washer which seals the tap chamber from the outside world.
The top washer is what is leaking. Should I tape around it to make it fatter? Prise it off and try to fit another with the same inner but wider outer diameter? Any ideas? The tap still needs to swivel, so I can't just silicone the joint!
Grateful as ever