R
rfm23
The screw attaching the light switch itself to the wall (the white plastic part) turns with my screwdriver but doesn't move out. How can I remove it? Thanks!
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Same way you'd remove any screw when a stripped thread stops it unscrewing - get something behind it, or behind what it holds in place, and apply some outward force whilst turning it.
If one of them will come out it shouldn't be to hard to get something thin between the switch and the wall to act as a lever.
MAKE SURE THE POWER IS OFF!
If one of them will come out it shouldn't be to hard to get something thin between the switch and the wall to act as a lever.
MAKE SURE THE POWER IS OFF!
And once you have got the old screw out, you may need either a fresh new 3.5mm screw and/or a rethreader
Depending on which part has stripped.
Depending on which part has stripped.
Is this a surface mounted box, that the switch is mounted on, if so, occasionally the threaded bush spins, that can be hard to get the screw out, if BAS way fails you may have to break the box up
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
