- Joined
- 20 Jan 2003
- Messages
- 30
- Reaction score
- 0
- Country
Have just replaced a light switch in my back room with a dimmer. There were lots of wires in there, so have just replicated the connections from the old switch. All worked ok in the back room.
However, on the other side of the wall (in the hall) is a switch that controls the downstairs hall and upstairs landing. This switches off the landing OK, but now the light in the hall will not switch off??? I don't get it if I've replicated the wiring from the old switch.
However, on the other side of the wall (in the hall) is a switch that controls the downstairs hall and upstairs landing. This switches off the landing OK, but now the light in the hall will not switch off??? I don't get it if I've replicated the wiring from the old switch.