light switch
- Thread starter ross081
- Start date
Basically L1=COM, L3=1Way, L2=2Way
Yellow wire to COM
Red and blue wires that were in L3 go into 1 Way
3 other reds to 2 way
If the switch works upside down to what you like then swop the wires between 1 way and 2 way over. I like to have it so if both switches are the same way around then the light is off.
Yellow wire to COM
Red and blue wires that were in L3 go into 1 Way
3 other reds to 2 way
If the switch works upside down to what you like then swop the wires between 1 way and 2 way over. I like to have it so if both switches are the same way around then the light is off.
The yellow needs to go to COM
The other two pairs or wires go to 1 and 2 . Provided they stay in the same pairs it is not critical which pair goes to 1
edit too slow
The other two pairs or wires go to 1 and 2 . Provided they stay in the same pairs it is not critical which pair goes to 1
edit too slow
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
