It's a two panel corner shower and quite old (Year 2000 ish) Matki. The glass door was catching on closing and I discovered that although the aluminium upright side was screwed firmly to the wall the next part in was able to pull out a bit at the top distorting the frame enough to stop the glass door closing.
In the pic the bit with the Matki logo is the top rail and it is side rail that is pulling out of the far left part which is screwed to the wall. I took the glass door off but it looks like I will have to dismantle the whole enclosure fix it but I'm not sure how! At the moment it is just a great advert for Gorilla tape! But at least it isn't going to catch/break the glass for the moment.
In the pic the bit with the Matki logo is the top rail and it is side rail that is pulling out of the far left part which is screwed to the wall. I took the glass door off but it looks like I will have to dismantle the whole enclosure fix it but I'm not sure how! At the moment it is just a great advert for Gorilla tape! But at least it isn't going to catch/break the glass for the moment.
