Look I know nothing about DIY or plumbing so any help here would be most welcome.
The cold bath tap is down to a trickle - it is fed from the tank in the loft.
The tap is a mixer I can remove the decorative bit which leaves me with a crosshead screw - remove this expecting to be able to pull tap off to look at inner but nothing moves - rock solid.
Any advice most welcome.
The cold bath tap is down to a trickle - it is fed from the tank in the loft.
The tap is a mixer I can remove the decorative bit which leaves me with a crosshead screw - remove this expecting to be able to pull tap off to look at inner but nothing moves - rock solid.
Any advice most welcome.
