Low pressure on Vokera Excell 80 SP boiler

[kazhove]

Hi
Can anyone help - the pressure on my Vokera Excell 80 SP boiler has been near the bottom of the red gauge for weeks. I think I need to turn one of the taps but am not sure which one and don;t want to do any damage. Is it the black 'adjustable stopcock' underneath on the right? If so, should it be open or closed? Or there is a white 'tap' underneath in the middle, should I move that?
Any advice gratefully recieved!

 

[kevplumb]

View media item 8364
look for something like this

 

[kazhove]

It's similar but not the same. I do have a white tap that looks like that though... should I turn it?

 

[kevplumb]

if its part of the loop yes

slowly

 

[kazhove]

This is what it looks like

Untitled

• kazhove
• 27 Apr 2009
• 1

Untitled

• kazhove
• 27 Apr 2009
• 1

 

[kevplumb]

turn the white tap under the yellow lever slowly and watch the pressure 1.2 cold

 

[kazhove]

No hot water this morning, and looks light pilot light out. Any advice?Pressure also 3 Help!

 

[kevplumb]

you have left the loop open

remove the silver pipe

bleed a rad into a bucket till you get the pressure down to 1.2 COLD

and don't do it again

now sod off it's 1 30 AM here

err i did put it in caps

 

[kazhove]

Oh dear. Thanks - and good night!
x

 

[kevplumb]

na bother bonny lad she hit the hay a while back

i'm only a plastic yank

 

[bellairaphon]

did u have the heating on at night time??? could be the expansion.