merlin gerin schneider rcbo's

[333rocky333]

fitted one of the new cream coloured ones today.
could not see the test button anywhere as lighting was poor
Finally had to resort to reading the instruction leaflet

 

[conny]

fitted one of the new cream coloured ones today.
could not see the test button anywhere as lighting was poor
Finally had to resort to reading the instruction leaflet

No shame in admitting you are not Knowall.

 

[333rocky333]

Oh and they have a slightly deeper profile so stick out further than the recent green shneider mcbs, so now look a bit sad in a six month old board

 

[DaftPunk]

It's so sad to see that even the industry standard for quality DB's and outgoing devices seem to be forfeiting quality to save a few pennies and maximise profit

 

[AndyPRK]

So what's the answer to the missing test button then?

 

[mfarrow]

Spike the cable

 

[333rocky333]

So what's the answer to the missing test button then?

oh sorry its not missing, its sort of disquised as part of the housing to one side of the toggle switch, there is a small T embossed on it.

 

[RF Lighting]

Was it one of the domestic easy 9 range? They look really cheap

I hope schneider aren't going to be changing thier commercial stuff too?

 

[333rocky333]

been told these are the only ones now to replace the m/g multi 9 C60 range , they fit the 3 phase boards etc, but to me dont seem all that, unless you get old stock these are what you get now

http://www.ebay.co.uk/itm/MERLIN-GE...6R30-16A-30MA-RCBO-/321290098546#ht_25wt_1170

 

[Iggifer]

don't like those at all

time to stock up

 

[RF Lighting]

Hager it is then...