- Joined
- 12 Sep 2007
- Messages
- 72
- Reaction score
- 0
- Country
Hi there,
hopefully one of you wonderful people can help me understand the problem i think i have.
I have fitted a mira excel built in shower and i have very little pressure and also the temperature is crap to put it politely.
I have read the instruction manual and it says that a mini expansion vessel should be fitted on the cold water inlet to the boiler. i have looked on the web and found that most mini expansion vessels are fitted outside the boiler, therefore i know mine has not got one, unless it is hidden in the boiler? i cant see it!
Anyways, would this really fix my pressure and temperature problem if i fitted one of these?
I look forward to some advice that will hopefully make things clearer
hopefully one of you wonderful people can help me understand the problem i think i have.
I have fitted a mira excel built in shower and i have very little pressure and also the temperature is crap to put it politely.
I have read the instruction manual and it says that a mini expansion vessel should be fitted on the cold water inlet to the boiler. i have looked on the web and found that most mini expansion vessels are fitted outside the boiler, therefore i know mine has not got one, unless it is hidden in the boiler? i cant see it!
Anyways, would this really fix my pressure and temperature problem if i fitted one of these?
I look forward to some advice that will hopefully make things clearer