i have a mira sport 9kw shower....i turned it on one day on the high setting and it kept tripping the switch...so have only been using it on medium where its fine....today i cleaned the inlet filter and put it back together ...but the problem is the pressure is crap...it heats the water but the flow is rubbish....can any one advise...thanks
mira sport electric shower
- Thread starter 1iydwilly
- Start date
Sponsored Links
one of the heating elements has blown.
you can check the heating elements by doing a resistance test with a multi meter.
each pair should have a reading of between 10 - 18 ohms.
new heat can needed.
you can check the heating elements by doing a resistance test with a multi meter.
each pair should have a reading of between 10 - 18 ohms.
new heat can needed.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
