We're planning a new kitchen and an improvement would be to move the hob 20 or so cm to the right of its current position. This would also mean moving the cooker hood (and installing a new one). The present old fashioned hood vents out through the wall behind the wall unit above the hob. Two questions -
(1) is there a way of doing this with flexible ducting without moving the vent (the outside wall is rather nice stone)? and
(2) if (1) is possible, i presume this would mean a chimney extractor would not be feasible since it would expose the old venting position?
Hope I've made myself clear! Many thanks for any thoughts.
(1) is there a way of doing this with flexible ducting without moving the vent (the outside wall is rather nice stone)? and
(2) if (1) is possible, i presume this would mean a chimney extractor would not be feasible since it would expose the old venting position?
Hope I've made myself clear! Many thanks for any thoughts.