My new shower keeps pulsating. why???

[jam1e]

Hi folks,
A first post for me so hello to all!
I fitted a new shower yesterday after the last one broke.
The new pumped shower is a Triton AS2000XT Thermostatic Power Shower.
The shower works fine but keeps making a pulsating noise from quiet to loud continually changing every couple of seconds.
I'm wondering whether its due to air in the system
Any help would be appreciated
Just to add that i replaced the shower "like for like" but just a different brand. I also fitted it as per the instructions to get the air out of the system.

 

[seco services]

Try commissioning it again with the commission link.
Also check the inlet blanking plugs are in fully in the unused inlets, or it can draw air in.

 

[Agile]

I have always found that Triton products are the most unreliable.

Once I fitted one of their shower pumps and it failed after just four days. They were totally unhelpful and that cost me £160 and three hours on a saturday to replace it.

It does sound like air in the unit. It will probably work its way out over a few days or perhaps can be removed by following the commissioning instructions.

Tony