My Zanussi zwf1221s has stopped spinning

[Li72sa]

Hi my Zanussi zwf1221s has stopped spinning. It went through the wash cycle then started leaking from the door and powder tray. I've opened the door in bottom right hand corner and drained it. There was 10p and 2p in there which I've removed. The drum turns as if attempting to spin but just won't catch to go into spin. Any ideas what to try next? Thanks

 

[jj4091]

Switch off, leave for 5 mins & then put it on a spin only cycle & see if it goes through it to the end of the program. It may need to be reset in the diagnostic mode but try that first.

 

[Li72sa]

Thanks, after a couple of attempts it seemed to work. Will give it another go this weekend. If it fails, I'll post requesting how to do the reset. Thanks for the advice.