need help with new thermostatic shower install

[maxinho]

i am just about to start installing a new thermostatic mixer shower in my bathroom. i have a combi boiler and no water tank.

the water pressure is not that great. however i have use a mixer shower off my bathroom taps and its seems to work ok.

would this be the case with a thermostatic mixer?

i am going to fit a shower tray in the corner of my bathroom dose it matter where i put the drain hole in the tray?

ant new tips are great full.

 

[Breesey]

The shower should be fine.

does the tray not have a hole in it already?

 

[hi-spec plumbing heating]

put the tray what way round you like.

 

[maxinho]

thanks guys, the shower try dose have a hole in it.

i have been told i may have to raise it off the floor the beams go across and i may not be able to cut them? they are 6" x 2"

i also want to move the radiator will i have to drain all the system and re fill up again to do this?

 

[hi-spec plumbing heating]

i have been told i may have to raise it off the floor the beams go across and i may not be able to cut them? they are 6" x 2"





i also want to move the radiator will i have to drain all the system and re fill up again to do this?

you don't have to, but on a combi just as easy to.

 

[maxinho]

is there a way to temp plug the pipes if i cut them off?

 

[hi-spec plumbing heating]

what so you can still use the system with the rads pipes cut off ?

 

[maxinho]

yes if i can, or just until i move the rad to the other wall?

 

[hi-spec plumbing heating]

http://www.screwfix.com/app/sfd/cat...HZOSFFQ?productId=31319&imageNo=null&ts=82991


or


http://www.screwfix.com/app/sfd/cat...HZOSFFQ?productId=24331&imageNo=null&ts=83035

 

[maxinho]

thank you great help.