I have lost all hot water and central heating and could use some help. I have power to the fused spur and also to the timer/controller panel (Drayton lifestyle). When the panel calls for either hot water or central heating nothing happens. The boiler has no power to it and the pump does not run. Tried an alternative timer/conroileer and no diffence. System is gravity hot water tank with tank stat, 3 way valve. The wiring junction box in the airing cupboard has power to the common live connection. Any advise?
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
No power to boiler
- Thread starter Peter180
- Start date
Thanks for the reply. The boiler is a Glow-worm Flexicom and having checked the installation and service manual, I cannot find reference to a high limit stat. Any ideas where it might be? The boiler display is blank with no power going to it, could this be the stat? Thanks
Have you got 240 at boiler , have you checked pcb fuse, then faulty pcb
Paul
Paul
No other power switch accidentally turned off. Will check pcb fuse and post a reply. Thanks for advice so far, merry Xmas.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
