Noggins needed or not?

Joined
10 Mar 2025
Messages
38
Reaction score
2
Country
United Kingdom
Hi all.... I am putting up plasterboard for my kitchen ceiling.... the plasterboard is running across the joists as its meant to ... the joists all have very random gaps betwen them but none more than 390mm apart.... I am using fire rated plasterboard... is there any reason to put noggins across any of the gaps... The previous ceiling that i took down has none? There are no cut edges anywhere in the room (They are all at the edges of the room). thanks
 
When I reboarded ceilings I put timber knoggings so that all the board edges had screws through into timber. Stopped any future cracking on joints.

Then you get herringbone struts to hold the timers square.

Or some don't bother with either..

Fire rated board is heavy. Get help or a board lifter.

I used rock wool stuffed in void then chicken wire to hold. Foil backed plasterboard in kitchens..
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top