I'm looking for some advice regarding a problem I'm having with a Vokera Hydra.
This boiler is a little over 2 years old, I've just had the fan replaced because it wasn't running, having had a look at it this seems to have been down to the blade/inpellor thingy rubbing against the housing, the motor/PCB is spring mounted... these seem to have sagged.
Anyways, what it's doing now is getting up to the set temperture and sitting there for between 15 mins and 2 hours before starting a steady groan accompanied by much vibration of the outer casing, but this doesn't seem to affect the temperture or operation of the boiler.
Any ideas/advice/opinions would be appreciated
This boiler is a little over 2 years old, I've just had the fan replaced because it wasn't running, having had a look at it this seems to have been down to the blade/inpellor thingy rubbing against the housing, the motor/PCB is spring mounted... these seem to have sagged.
Anyways, what it's doing now is getting up to the set temperture and sitting there for between 15 mins and 2 hours before starting a steady groan accompanied by much vibration of the outer casing, but this doesn't seem to affect the temperture or operation of the boiler.
Any ideas/advice/opinions would be appreciated