I have acquired a property but discover that up and downstairs sockets are all on a single ring circuit. What is the best way to convert to a separate ring circuit for each floor. I believe I need to do this as some equipment causes the fuse to trip off.
one ring to 2
- Thread starter aeromat
- Start date
Sponsored Links
depends on how its wired. it could be all upstairs in spurred from down or vice versa, upstairs is wired on a ring then downstairs then back to CU. youll have to find out how its wired before doing anything.
if upstairs is wired then downstairs, simply find the cable between up and down and re direct it to the CU making 2 rings. if you do this, make sure that the rings are split properly and none upstais are live when only the downstairs is on
if upstairs is wired then downstairs, simply find the cable between up and down and re direct it to the CU making 2 rings. if you do this, make sure that the rings are split properly and none upstais are live when only the downstairs is on
Do you have a solid ground floor, or a suspended timber floor??
ie - Do the cables for the ground floor sockets come down from the ceiling or up from the floor? Take a socket off to see.
ie - Do the cables for the ground floor sockets come down from the ceiling or up from the floor? Take a socket off to see.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
