I turned off the water and drained the system from a drain cock just above the boiler on the ground floor. This allowed me to remove a radiator on an inverted pipe loop. I then capped off the 2 pipes.
Problem I have now I've turned the water back on neither the primary or heating circuit is refilling. No water is being taken from the expansion tank and if I open any bleed valves I don't seem to be losing any air.
I suspect I haven't done something but I haven't a clue what that is!
I couldn't find any posts relevant but if someone can point me to one or come up with any answers themselves it would be greatly appreciated.
Many thanks.
Problem I have now I've turned the water back on neither the primary or heating circuit is refilling. No water is being taken from the expansion tank and if I open any bleed valves I don't seem to be losing any air.
I suspect I haven't done something but I haven't a clue what that is!
I couldn't find any posts relevant but if someone can point me to one or come up with any answers themselves it would be greatly appreciated.
Many thanks.