Orange water after changing to unvented cylinder

Joined
27 Dec 2006
Messages
589
Reaction score
7
Location
London
Country
United Kingdom
Just changed over from old gravity fed system to unvented tank... Hot water running fairly orange...theres only about 10 metres of old 15mm copper left between tank and tap, rtge rest is either new copper or plastic....
Could the increased preassure in that short run be blasting residue off pipe?
 
Sponsored Links
I'm no expert but orange water makes me think rust more than copper.
 
Check the type of expansion vessel (EV) - sounds like they might have used the wrong type and you're getting rusty water through the tap now.

If that's actually what's happened then I'd be having a serious word with the installers!!
 
Well maybe it was the increased pressure, maybe it was the Flux... But either way it cleared within a couple of days....
 
Sponsored Links
Well maybe it was the increased pressure, maybe it was the Flux... But either way it cleared within a couple of days....
What colour is the expansion vessel for the cylinder, if there is one?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top