Paddle lifter change on a hoover WMH 148 DF-80 washer.

Discussion in 'Appliances' started by markymark1234567, 3 Nov 2013.

  1. markymark1234567

    markymark1234567

    Joined:
    4 Apr 2010
    Messages:
    222
    Thanks Received:
    23
    Location:
    Yorkshire
    Country:
    United Kingdom
    Hi, the paddle has snapped on the above washing machine.
    I have figured out how to get to one of the securing screws by taking off the black hose at the bottom of the drum.
    However I cannot find a way to get access to the other retaining screw.
    Any help would be greatly appreciated.
     
  2. Sponsored Links
  3. rocks1

    rocks1

    Joined:
    30 Apr 2008
    Messages:
    6,137
    Thanks Received:
    1,040
    Country:
    United Kingdom
    You won't unless you take the drum out and split it and remove the inner drum. Only way is to break lifter off and slide new one in then put one screw on the front edge on the lifter to stop it sliding back . Do this from inside the drum.
     
  4. DIYnot Local

    DIYnot Local

    Joined:
    3 Sep 2019
    Country:
    United Kingdom

    If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

    Select the supplier or trade you require, enter your location to begin your search.


    Are you a trade or supplier? You can create your listing free at DIYnot Local

     
Loading...

Share This Page