Paloma PH-5-3F

[Invisible-Man]

Hi, if anyone is familiar with this propane water heater I would appreciate any help that can be given,

Plenty of water volume and pressure going into heater but no more than a very slow output, not even enough for the heater to ignite, does not seem to be the water control as I have had that stripped down and refitted today with no joy!

Any ideas

Many thanks

 

[Agile]

Could be any sort of blockage or the heater is scaled up although Essex is not a very hard water area.

Tony

 

[Invisible-Man]

Could be any sort of blockage or the heater is scaled up although Essex is not a very hard water area.

Tony

I will try disconnecting main in and the heat exchanger from the water control and connect the main in direct to the heat exchanger to see what flow I can get at the hot tap, if slow then it must be within the heat exchanger. if not, may be the control valve, diaphram etc.

Any idea where I can get parts for this heater locally