Patio door lever

[Garrybibson]

I have some fairly old patio doors, but unfortunately the lever that you move up and down to lock the door in to a closed position has snapped. I have tried searching the net and eBay but I can't seem to find a like for like replacement.

I will put a picture of it up if required, but I will at least attempt to describe. The part I am looking for is a piece of metal bent in to a right angle, the small end (approx 2 inches) fits into a rotating mechanism in the door and then the metal lever bends at a right angle to move parallel to door (approx 4 inches) away from the lock and handle. This then moves up and down in a circular motion to lock/unlock the door. Lastly the lever twists to make moving up and down easier.

Does anyone have any suggestions where I might be able to source one of these parts? I can't even find something that looks remotely similar.

Any help appreciated.

 

[foxhole]

You could try google image search?

 

[Garrybibson]

Thanks for the suggestion. I have had a look and found only one which resembles anything like it

http://www.dgsupplyline.co.uk/slidi...ssories/patio-door-thumbturn-blade-lever.html

I will have a go at finding some measurements on this item.

 

[crank39]

Thanks for the suggestion. I have had a look and found only one which resembles anything like it

http://www.dgsupplyline.co.uk/slidi...ssories/patio-door-thumbturn-blade-lever.html

I will have a go at finding some measurements on this item.

Click on the second picture, this gives you the sizes you'll require