Hi all,
I had some large cast iron rads installed a couple of years ago. I know they are very sensitive to corrosion etc and so I ensured that the system was treated with plenty of inhibitor.
Just to make sure all is well I have tested the system and the pH has come out at 9 which is too high. How can I reduce the pH level whilst not reducing it too much. A pH of 7.5 thru 8 is apparently ideal.
Thank you.
I had some large cast iron rads installed a couple of years ago. I know they are very sensitive to corrosion etc and so I ensured that the system was treated with plenty of inhibitor.
Just to make sure all is well I have tested the system and the pH has come out at 9 which is too high. How can I reduce the pH level whilst not reducing it too much. A pH of 7.5 thru 8 is apparently ideal.
Thank you.