Get an Electrician in FFS 
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
PIR 4 wires - where do they go?
- Thread starter simsum
- Start date
grey to N
black to L
brown to seperate terminal block as in the original
NOTHING to the L/S.. this is the switched live from the PIR.. it's used for switching another floodlight...
with a live to the L/S you are bypassing the PIR and just switching the light on..
black to L
brown to seperate terminal block as in the original
NOTHING to the L/S.. this is the switched live from the PIR.. it's used for switching another floodlight...
with a live to the L/S you are bypassing the PIR and just switching the light on..
Thanks ColJack.
The lights were on even with the switch off. Had to disconnect via the consumer unit.
I'll reconnect tomorrow and give it a go.
I did not realise when i was posting before that the pir was also connected to the other light outside.
The lights were on even with the switch off. Had to disconnect via the consumer unit.
I'll reconnect tomorrow and give it a go.
I did not realise when i was posting before that the pir was also connected to the other light outside.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
