hi can any one help.i have started to build a pitch roof which will lean over a flat roof in place already. i never done this kind of work so need a bit of help in idiots guide fashion.
the roof measures from the top of the top wall plate to the facia with a little for overhang and guttering 2ft 6".
the tile size i hope to use is about wide=165mmxlengh 260mm.
i dont know what the angle is or to get that angle if it is majorly important for this smallish job.
what would the correct spacing be for the battons??
does any one have some top tips for some one willing to have ago.
thanks for any help colinView media item 33164
the roof measures from the top of the top wall plate to the facia with a little for overhang and guttering 2ft 6".
the tile size i hope to use is about wide=165mmxlengh 260mm.
i dont know what the angle is or to get that angle if it is majorly important for this smallish job.
what would the correct spacing be for the battons??
does any one have some top tips for some one willing to have ago.
thanks for any help colinView media item 33164