I have fiixed 60mmm insulated p/b to walls but due to the sloping ceiling there is a 75mm gap(should have cut angle on top of p/b ).I have filled the gap with expanding foam and then raked it back an inch from p/b level.Do I now fill this with bonding plaster or is something else a better job?(I intend to scrim + skim over).
Plastering over kingspan
- Thread starter woodgnome
- Start date
Sponsored Links
From what's been posted before on here it seems you could just cut the foam back flush, scrim it and skim it.
I haven't tried it myself, yet.
bonding would do for me, if you leave it for the next day before you skim seal it up with a coat of pva, have a read of other posts on using pva.
I haven't tried it myself, yet.
bonding would do for me, if you leave it for the next day before you skim seal it up with a coat of pva, have a read of other posts on using pva.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
