Plastic manhole chamber

[trevorbayliss]

i have put new drains around the house. I have used the plastic round chambers.

The base has outlets on both sides (4 at the sides and two in the middle).

Waste comes into the base from 2 points on one side and exits out the middle outlet. All good.

But on the non used side where I have blanks fitted I get a small build up of waste/paper inside these outlets. It’s not a massive problem but I can imagine in the summer in hot weather you will smell this stuff as it is clearing away.

So can I buy anything for these chambers where I can blank these legs off around the main channel area which runs away. So you don’t get any rubbish stuck in the non used outlet small areas

 

[Madrab]

You can get angled blanks to fit into them so it sits flush with the channel.

 

[trevorbayliss]

Thanks Madrab, been trying to locate where these are sold but drawing a blank (ho ho) at the mo. Any links ?

 

[Jackrae]

The manhole lid should seal the chamber so's no foul smells come out

 

[Hugh Jaleak]

Wavin make channel covers for their Osma range of chambers. Part numbers are 4D948 for the left hand side and 4D949 for the right hand.