Porcelain cladding for kitchen splash back

[pr1970ster]

Hey all

We've come across some porcelain cladding 1500mm X 1000mm X 5mm that we are interested in using as a splash back in our kitchen wall, which is approx 2400mm X 680mm.
We need 3 sockets cut in as well. Just wondering if this sounds like a viable option. Just concerned about the cuts required and it will of course be in two pieces.
Could any decent tiler be able to do this job ?

Thanks

 

[bobasd]

yes.using expensive blade in a angle grinder.
tilers who do commercial work might carry a long cutting beam for ripping but thats an expensive specialist bit of kit.