My condensing boiler works fine on the central heating mode but after 10 mins on the water heating it cuts out the power off totally to boiler, I have to wait 10 mins before the boiler will re-start. Anybody got any ideas what i can do to resolve this?
Potterton EP3002
- Thread starter kevmal
- Start date
If it goes to lock out when hot water mode, time to call gas safe engineer
Do you mean the boiler stops firing because it's reached temp, it cools and then re fires or that a fuse pops and there is no power to the boiler or clock?
Requires a manual re set?
What boiler is it?
Is heating fine?
If so I would suspect a weak pump/blockage
Requires a manual re set?
What boiler is it?
Is heating fine?
If so I would suspect a weak pump/blockage
To be clear, there is power to the clock and boiler but you have to manual reset the boiler?
Sounds like a circulation/ pump issue
Sounds like a circulation/ pump issue
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
