I'm very new to the forum and would appreciate some help with this! I have a Potterton Lynx electronic (I'm not sure if that's the 1 or the 2 ?), Yes I know it's old but it does seem rather well built compared to lots of modern stuff and I intent to keep it for a while yet..
The problem is this: When I turn on my bath tap, everything works correctly, I get the DHW Demand light, brief Ignition, low flame and high flame lights.. all normal, however the temperature lights rarely get above the first orange light, also if the flow alters at all (such as with the shower) it's shuts off the heat all together and all the heat lights go out. It has done this a couple of times with the tap on full as well. The central heating appears to work normally but that rarely gets very high on the temp lights either (sometimes two orange lights). Any idea's? Your experiences with this boiler would be appreciated, Great forum! Thanks.
The problem is this: When I turn on my bath tap, everything works correctly, I get the DHW Demand light, brief Ignition, low flame and high flame lights.. all normal, however the temperature lights rarely get above the first orange light, also if the flow alters at all (such as with the shower) it's shuts off the heat all together and all the heat lights go out. It has done this a couple of times with the tap on full as well. The central heating appears to work normally but that rarely gets very high on the temp lights either (sometimes two orange lights). Any idea's? Your experiences with this boiler would be appreciated, Great forum! Thanks.