Boiler not firing up. It has been working fine without a hitch for around 8 years. This morning the house was cold and there was no heating or hot water.
If roomstat is turned up to activate the boiler, the flue fan will start up but there is no ignition spark and therefore no pilot and no main burner. After a few seconds the flue fan will stop and will then restart after a minute or so but still no ingition can be seen.
Main pcb fuse ok.
Any ideas please?
Thanks
Andy
If roomstat is turned up to activate the boiler, the flue fan will start up but there is no ignition spark and therefore no pilot and no main burner. After a few seconds the flue fan will stop and will then restart after a minute or so but still no ingition can be seen.
Main pcb fuse ok.
Any ideas please?
Thanks
Andy