potterton profile 60e

[fireteam]

The fan runs on my boiler but the boiler does not ignite. slight tap to the front cover and the boiler ignites. Can anyone help

 

[solo]

Hang on. I'll just have a look in the yellow pages and see if I can find a number for "Boiler-tappers" in your area

 

[kier]

ok i have found the wheel tappers and shunters,will that do.

 

[gavinda]

does it 'rev' up then stop and 'rev' again?

 

[baxpoti]

Is it sparking?
Could be the electrode lead 'earthing' or a dodgy APS,

on the other hand...........

Your door seals may not be performing as well as they should be.
This is potential a very serious problem and needs further on-site investigation by a competent engineer

 

[fireteam]

I have replaced the door seal and the electrode lead, could this mean the electronic control box is defective no funnies please

 

[baxpoti]

Yes probably, new PCB req'd

 

[fireteam]

Thanks for the help pcb on order

 

[g60bv]

could well be the air pressure switch sticking.

 

[baxpoti]

could well be the air pressure switch sticking.

Didn't I mention that earlier?

 

[g60bv]

maybe.

 

[Baxmax]

Call Heateam. They WILL sort it

 

[chaps]

what was the outcome of your boiler fault, was it air flow switch?

and why cant i sleep ???