- Joined
- 22 Feb 2005
- Messages
- 5
- Reaction score
- 0
- Country
Good Morning everyone I have a problem with my profile 80el its starting to drive me nuts as I can see no reason why the boiler has started doing this anyway heres the fault :- The boiler switches on and off okay and ignites all the burners okay however when the boiler is running it will suddenley start trying to light the burners again causing the clicking sound (even though all the burners are lit) Its the same sound as if the boiler was calling for gas eg the meter run out etc. We do not have a token meter and all the burners are okay and there is plenty of gas pressure so that is not causing the fault. However I have seemed to isolate the fault to the hot water side of the system as when I switch off the hot water the clicking stops and there is no longer a problem the heating side works okay. Turning back on the hot water the clicking will intermittantly occur and continue getting more frequent until I once again switch off the hot water and switch it then back on from the programmer. ANY IDEAS?????? PLEASE HELP!!! many thanks.
Martin Thompson
Martin Thompson