Hello,
I was after some assistance / info please.
I have the above dishwasher which is 6 years old. A couple of years ago I had an F3 fault code and I replaced the heating element and all was OK.
However the problem I have now is -
Choose wash (normally Eco) and press start and close door. Within less than 10 seconds the machine is bleeping. Open door and start button is flashing. Counting from the start there are 16 flashes. Wash cycle returns to 'rinse' cycle also.
I have run the test cycle x 2 and both times the cycle lasted approx 30 seconds before bleeping and giving me the 16 flashes again. Wherever I have looked I can find nothing on the subject of 16 flashes !!
So I'm stuck and need some assistance please !!
thanks
Steve
I was after some assistance / info please.
I have the above dishwasher which is 6 years old. A couple of years ago I had an F3 fault code and I replaced the heating element and all was OK.
However the problem I have now is -
Choose wash (normally Eco) and press start and close door. Within less than 10 seconds the machine is bleeping. Open door and start button is flashing. Counting from the start there are 16 flashes. Wash cycle returns to 'rinse' cycle also.
I have run the test cycle x 2 and both times the cycle lasted approx 30 seconds before bleeping and giving me the 16 flashes again. Wherever I have looked I can find nothing on the subject of 16 flashes !!
So I'm stuck and need some assistance please !!
thanks
Steve