Hi Guys
The water I'm getting from the boiler isn't hot enough, its only just barely warm, even with the temperature gauge at Max. I read in the Corvec manual I found on the web that the Diaphram and / or thermocouple may need changing. I've tried to lower the water pressure, still the same.
Any ideas would be appreciated.
thanks
The water I'm getting from the boiler isn't hot enough, its only just barely warm, even with the temperature gauge at Max. I read in the Corvec manual I found on the web that the Diaphram and / or thermocouple may need changing. I've tried to lower the water pressure, still the same.
Any ideas would be appreciated.
thanks