Pyronix paragon plus to deltabox

[chipuk]

i thought id do some routine maintenance on my paragon plus alarm
current battery has date written on it 2006 so i guess its lasted well, new one on order .

what i need some help with is the siren box, not sure how old it is but wanted to replace it with
deltabox plus

on my control panel i havethe following connections

- spk Blue ( i think this pair is to an internal sounder above the airing cupboard)
_spk Brown

-stb grey
+stb green

ba yellow
b+ red
b- black

bt blue


i cant work out which should go to which on the deltabox siren i have the following my guestimate is the following

T ?
T ?
ENG Hold
STB
Bell YELLOW
+12v RED
-12v BLACK


hopefully someone can give me some advice

 

[Vinny1]

I had some issues on mine to connect. from the T i would say this is tamper and it has to be looped back. Then its normally a strobe, bell and power. from your notes it seems you have two types of strobe? plus and minus i guess for different versions. Could you test the bell by using the panel to say ring the bell then disconnect the wire to check etc?

 

[Handymanjo]

B+ = BELL + =red
B- = BELL OV = black
BA = Bell trigger = yellow
BT = Bell tamper return = Blue
Put a wire link between B- black and the other T in the bell box
-STB = STB grey