Hi, was after some help bleeding my central heating system if possible?
Firstly I'm a real ameuter at this kind of stuff so please bear with me (i've read the FAQs above but still a little confused)...I'm presuming I have a vented system as I have a cold water tank in the loft, a boiler in the downstairs kitchen and a hot water cylinder in the airing cupboard upstairs.
When my central heating pump first starts up theres a gurgling sound for a few seconds so there presumably is some air trapped in the system. I've bled all the upstairs radiators but its still making the noise.
Therefore I've had a look in the airing cupboard for another bleed valve near to the pump/cylinder. I've taken some photos and would really appreciate someone pointing me in the right direction:
Plus theres what looks like a valve on the pipe going into the cylinder near to the bottom, level with the pump....
In this system what do I need to loosen to get the air out? Would it be the screw in the pump or another valve? Plus how does the system need to be set when doing this?
Thanks in advance
Firstly I'm a real ameuter at this kind of stuff so please bear with me (i've read the FAQs above but still a little confused)...I'm presuming I have a vented system as I have a cold water tank in the loft, a boiler in the downstairs kitchen and a hot water cylinder in the airing cupboard upstairs.
When my central heating pump first starts up theres a gurgling sound for a few seconds so there presumably is some air trapped in the system. I've bled all the upstairs radiators but its still making the noise.
Therefore I've had a look in the airing cupboard for another bleed valve near to the pump/cylinder. I've taken some photos and would really appreciate someone pointing me in the right direction:
Plus theres what looks like a valve on the pipe going into the cylinder near to the bottom, level with the pump....
In this system what do I need to loosen to get the air out? Would it be the screw in the pump or another valve? Plus how does the system need to be set when doing this?
Thanks in advance