Ok, Mr Novice speaks again!
Sorry, we have an old potterton Prima, the pressure is low on the dial. On my last thread you guys suggested I refill it...
There is a release valve next to the pressure guage.. which I found works! Upstairs above the boiler there is a tap which in turn leads to a blue plastic pipe which in turn goes back into a copper pipe which has a valve and a nut controlloing it..
I opened the tap and then backed off the nut slightly but it just leaked water from the nut.. the pressure is really low, nearly 0..
Any ideas? Will post some pics in due course
Sorry, we have an old potterton Prima, the pressure is low on the dial. On my last thread you guys suggested I refill it...
There is a release valve next to the pressure guage.. which I found works! Upstairs above the boiler there is a tap which in turn leads to a blue plastic pipe which in turn goes back into a copper pipe which has a valve and a nut controlloing it..
I opened the tap and then backed off the nut slightly but it just leaked water from the nut.. the pressure is really low, nearly 0..
Any ideas? Will post some pics in due course
