Had our boiler replaced in june by a corgi registered plumber .He said that im might have release trapped air in the system in the next few days so i did ,anyway now one of our radiators is cold at the top on one side ,but it has a solid nut on the where i could release the the air from.Should i crack nut open or is there some other way to release the air
radiator airlock
- Thread starter webs
- Start date
Sponsored Links
if you do end up taking the plug out, buy yourself a bleed plug and some PTFE tape first. Cheaply available at your DIY shed or plumbers merchant. Will make life easier next time.
Turn off the valves at both ends of the rad before you take it out, or water will gush out.
Turn off the valves at both ends of the rad before you take it out, or water will gush out.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
