Hi all 1st post here.
I had a burst water pipe so the plumber came out to fix it. He drained the system down and when the pipe was fixed he left it witrh me. He told me to keep bleeding the radiators and the hot water cylinder until the air was primed and water came out which I did.
However when I turned the heating back on only the upstairs rads were working, the downstairs ones are stone cold, the feeder pipe leading up to them are cold also. I do have hot water.
It's a fairly old systme with microbore pipes.
Anyone any ideas?
Thank you
I had a burst water pipe so the plumber came out to fix it. He drained the system down and when the pipe was fixed he left it witrh me. He told me to keep bleeding the radiators and the hot water cylinder until the air was primed and water came out which I did.
However when I turned the heating back on only the upstairs rads were working, the downstairs ones are stone cold, the feeder pipe leading up to them are cold also. I do have hot water.
It's a fairly old systme with microbore pipes.
Anyone any ideas?
Thank you