Ravenheat boiler warm water ?????

Joined
27 Apr 2010
Messages
1
Reaction score
0
Location
Lancashire
Country
United Kingdom
Hi ,
I have a Ravenheat RSF84E combi boiler that's 5 yrs old , found that when the central heatings on fine nice hot water BUT when it's just the domestic hot water its luke wam at best .
After doing some digging around i replaced the DHW sensor , but this hasn't made a difference .I have noticed that the radiators do get a bit warm when the tap is on although no real hot water is coming out of the taps , and wonder if this is related , done some more digging and think it might be the diverter valve .
If this is the culprit do i need to change the whole unit or is there a repair kit for the diaphram ?
All advice would be gratefully recieved
Thanks
 
Sponsored Links
Not sure is this the one with the black microswitch that clip on top of diverter with a black and brown wires or is it the one with the black square box microswtich that sits on the end of the div valve, if its the latter of the 2 then yes defo can its a geononi valve and diaphragms stocked at local mercahants bout 5 quidish, if the 1st of the 2 when you ring ravenheat they say you have 2 get complete valve, however if you get a geononi one and unclip the spindle from diaphragm, then unclip the old diaphragm from the old spindle, and put new diaphram onto old spindle you can repair it, a little fiddley but will save on dough, as the only diff between the 2 is the length of spindle, diaphragms exactly the same
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top